The structure is used to support a distributed load of $\mathrm{w}=15 \mathrm{kN}/\mathrm{m}$. The bolts at $\mathrm{A}$, $\mathrm{B}$, and $\mathrm{C}$ each have a diameter of $16 \mathrm{mm}$, and each bolt is used in a double shear connection. The cross-sectional area of axial member $\left(1\right)$ is $3,080 {\mathrm{mm}}^2$.

The limiting stress in axial member $\left(1\right)$ is $50 \mathrm{MPa}$, and the limiting stress in the bolts is $280 \mathrm{MPa}$. Determine the factors of safety with respect to the specified limiting stresses for axial member $\left(1\right)$ and bolt $\mathrm{C}$.